Ships w/ Sails

1
July 23, 2023
Some of the cannons
2
July 23, 2023
The first parts ready for assembling
3
July 23, 2023
Endeavour and Victory
4
July 23, 2023
The first parts glued together
5
July 23, 2023
A replica of the Endeavour visiting London
6
July 23, 2023
The beautiful stern of the Endeavour
7
July 23, 2023
Endeavour in Greenwich
8
August 10, 2023
The figure head of the Victory. Note easy to paint something like this in such a small scale.
9
August 12, 2023
The original figurehead, now preserved in a museum in Portsmouth
10
August 10, 2023
Airfix indicated that the gunports should be painted red and this really looked nice. Until I realized that this was incorrect. Beacause Airfix only provides gunbarrels for most of the cannons and the have to be fixed to something. So Airfix closed the gunports and suggested to paint them red. But in reality, the gunports are open and you could look into the shipif you wanted. So they should be dark/black instead of red, so I changed them.
11
August 10, 2023
The two boats in place. I painted one of them like the original in the museum: white with a green with gold board. When I fixed the boats, I noticed that one of the guns had come loose and dropped inside the hull. With a lot of shaking, I managed to get it out again, I put a tiny rope around the barrel to hold it in place until the glue had settled, as this was already the second time that one of the guns disappeared inside the hull. I also noted that the lower deck had come loose a bit, but you won't see it
12
August 10, 2023
The bow of the Victory with the figure head in place. When I wanted to glue the knightheads in place (the two black poles under the bowsprit) had gone awol, so I decided to revert to some old craftmanship and made them out of wood! (Later I found the missing one back again)
13
August 12, 2023
Two of the masts testfitted.
14
October 26, 2023
All masts in place
15
October 26, 2023
Sitting on her final resting place, together with HMS Endeavour, the ABN Volvo ocean race ship and a souvenir Viking ship from Norway.
16
October 26, 2023
Making the shrouds. This was a real.... Airfix provided two bobbins with thread, but didn't say what to to use for the shrouds and what for the rigging. After making the first shrouds, I already ran out of thread, so obviously, I made the wrong choice. But making the shrouds wasn't easy. The bobbins are too thick to go between the wires on the rig, so I wound some thread on a piece of plastic.
17
October 26, 2023
The first result. You have to glue the threads together with Crystal Clear. Almost invisible, until you decide to paint the shrouds black: the drops of crystal clear show up 🙁
18
October 26, 2023
The gun doors in place and the red stoppers in the canons painted.
19
October 26, 2023
The first shrouds in place. You can see the blobs of crystal clear, which don't really look nice. The shrouds are too short, so I added some horizontal threads to make it possible for the crew to reach the crows nest.
20
October 26, 2023
All shrouds in place. The result could have been better, but I'm satisfied with it.
21
October 26, 2023
And suddenly it is a ship w/sail! Glueing the sails to the masts turned out to be easier than I thought and the result is quite nice. Now some miles of rigging to do!
22
November 10, 2023
Twenty-one miles of rope on the real one, so that mean a lot of ropes. I've done the first part of the standing rigging. I've used elastic thread, because this is less vulnerable. The problem is to get all the ropes tight. But the masts and the bowsprit are too flexible so they bend a bit,
23
November 10, 2023
The last sails added, the two jibs.
24
November 10, 2023
It's amazing to see ow many ropes there are. Even between the masts there are a lot of connections.
25
November 10, 2023
Most of the standing rigging done
26
November 10, 2023
Some of the running rigging. They are the ropes that control the sails. I used a thinner thread for this. The problem is that it isn't easy to run the wires like the original. The shrouds get in the way but I managed more or less to get them in place.
27
November 10, 2023
A quick picture to show the complexity if the standing rigging.
28
November 26, 2023
And the Victory is ready and this is the last picture of the battle field with the tools I used for the rigging. I will shortly post some pictures of the finished model
29
November 26, 2023
In the meantime I started working working on the second ship of the project, the Mary Rose, which remnants still can be seen in Portsmouth. It's a small model 1/400
30
November 26, 2023
Not too may parts but the detail is nice. You can count all of the 72 canons and the rudder also looks quite nice.
31
November 26, 2023
The gundeck with all the canons
32
November 26, 2023
The sails painted white and masked to paint the wooden parts brown.
33
November 26, 2023
The sails after painting and the hull has been primed.
34
November 26, 2023
And the third ship the bark Endeavour. I started this model about 45 years ago, but never finished it. So I dusted it and removed the cobwebs and to my surprise it survived remarkably well. Only one of the anchors had lost its blades. No idea how this happened. And now I have to decide how to finish it: the way Airfix suggests it or the way the replica looks, which I saw quite some years ago in Greenwich
35
November 26, 2023
The replica Endeavour
36
November 26, 2023
The beautiful stern
37
December 7, 2023
Most of the parts removed. Fortunately I didn't use a very strong glue
38
December 7, 2023
All the parts from the deck, ready for an update
39
December 7, 2023
The masts. I found a long black piece that looked like a yard from the rear mast, although the shape was a bit different. But when I had removed all the parts from the deck I held the ship upside down and suddenly a piece of plastic fell on mu table. The missing yard! I had been stuck to the railing.
40
December 7, 2023
A first coat of primer
41
December 7, 2023
After a lot of masking I first applied yellow, followed by a small line of blue
42
December 7, 2023
Quite some leakage, as was to be expected since the hull is very uneven. So some touching up to do.
43
December 7, 2023
All the deck parts with there new red paint. Because one of the anchors was damaged, I ordered a metal replacement. It was smaller than the original one, so I decided to combine the plastic old one with the metal new one.
44
December 7, 2023
The railing painted black
45
December 7, 2023
The lower part of the railing is red, so again some masking. The deck needs a lot of weathering before it looks a bit like the original
46
December 7, 2023
The stern with the windows. Still some work to do, white for the window frames and black for the hull
47
December 7, 2023
The masts with a new cot of paint
48
December 11, 2023
Almost ready
49
December 11, 2023
The decals in place. Looks good.
50
December 11, 2023
The finished model
51
December 11, 2023
Not bad for such a small model
52
December 20, 2023
Before......
53
December 20, 2023
and after the restoration
54
December 23, 2023
All the deck objects in place
55
December 23, 2023
The mast in place
56
December 23, 2023
First rigging done
57
December 23, 2023
Some of the shrouds in place. The Endeavour had unlike the Victory, ready-made shrouds, so I expected that they were a lot easier to install. How wrong could I be.
I found that one of the sets of shrouds is too short. Or did I do something wrong? And it's still very hard to get them taught. But we'll move on!
58
January 2, 2024
The final result: HMS Mary Rose 1/400
59
January 2, 2024
60
January 2, 2024
61
January 2, 2024
And HMS Victory 1/180
62
January 2, 2024
63
January 2, 2024
64
January 2, 2024
65
January 2, 2024
66
January 2, 2024
67
January 2, 2024
68
January 2, 2024
And bark Endeavour
69
January 2, 2024
70
January 2, 2024
71
January 2, 2024
72
January 2, 2024
73
January 2, 2024
All three together

Commenti

26 23 July 2023, 19:59

Rui
Nice to see something with sails 😁

11 August 2023, 05:56

Treehugger
If you have plastic sail sheets, you can always try use some kind of white fabric and pack the sails, I think that would look nicer than plastic sails. 🙂 Have not done that myself yet.

11 August 2023, 06:50

Wouter Roerdink
Yes I believe that would make it look better. But it would take a lot more time and as I usually build aircraft, I don't want to spend too much time on this model. It's something nice for a change and a great holiday souvenir

11 August 2023, 15:35

Rui
Treehugger... I have a couple of SOL in my stash that I plan to build in a couple of years when I retire. I have been putting a lot of planning into the builds and one thought I had was using the vacuum-form plastic sails, that came with the kit, as a form to shape the cloth sales I intend to use. I don't want the cloth to look out off scale so I plan to use something very thin and smooth and then use some stiffening agent like starch I guess. I think it will make a big impact on the kit because the plastic sails look...plastic 🙂

12 August 2023, 02:53

Wouter Roerdink
Sounds alright, but indeed, finding the right cloth won't be easy.

12 August 2023, 11:15

Doubtingmango
Looking forward to the finish!

12 August 2023, 11:58

Treehugger
Btw, if you like sailing ships, you might like the Horatio Hornblower movies. Set around 1789 and onwards. They made a few of them, not too long ago, a remake. Four of five movies rated 8 and higher on imdb, one rated 7.9. 🙂

23 December 2023, 19:05

Wouter Roerdink
Sounds good! And of course, the Onedin Line!

23 December 2023, 20:07

Curatorm
Astounding!

3 January 2024, 09:29

Project info

Ships w/ Sails

73 immagini

1:180

Completato

Tutti gli album

Visualizza tutti gli album »