Neutral Shturmovik
Komentáre
37 22 July 2023, 18:41
Moreno BaruffiniWow! I wasn't aware of this plane. Following with a lot of interest!
22 July 2023, 19:04
Łukasz GlińskiWelcome mates.
Me neither, until I visited the Duebendorf museum 🙂
24 July 2023, 08:32
Moreno BaruffiniI'm also curious about Dübendorf, now the Alptransit tunnel is closed, but It should be a nice trip from southern Alps
23 August 2023, 18:16
Łukasz GlińskiWell, I visited Dübendorf only once, more than a decade ago. Not that the Switzerland changes very quickly, but it was a while ago 😉
Not the biggest one I've been to (don't expect the size of Duxford), but very interesting. As it's in CH, there are many unique airplanes on display, so highly recommended.
The C36 was unfortunately parked the way you couldn't see the interior v.well, so there's a lot of guesswork involved in this build. Kora's kit has the same interior setup for all C36 versions which is not true for sure.
24 August 2023, 09:44
Łukasz GlińskiWelcome amigo 👍 I had to use some brute force today, but the fuselage has been closed
8 October 2023, 21:31
Edward MacKenzieWell, it's time for me to take a seat here too, especially because i have this kit in my stash and live 10 minutes from Duebendorf 😉
9 October 2023, 04:06
Moreno Baruffini...At the end of the day, I've also bought this kit! Great progress 👍
9 October 2023, 05:41
Łukasz GlińskiThanks a lot, it's sort of on hold currently, as I prefer sanding the resin kits outdoors 🙂
6 January, 21:25
CuajeteI agree with you, Łukasz 👍
Despite this, it is advisable to use a mask or you can even sand inside a bag if you do not do it outdoors. Resin dust is toxic and can be carcinogenic.
7 January, 20:37
Michael KohlConsider wet sanding. It ameliorates the dust problem considerably. Not using a dust mask when dry sanding resin isn't the most brilliant idea - being it in- or outside.
7 January, 20:52
Łukasz GlińskiJust to be clear, inside or putside - mask is always there, I just skip cleaning the residue from the modelling room 👍
7 January, 21:33
Łukasz GlińskiCA glue and some fancy sand from Revell Fix kit. Still, lots of sanding ahead
8 April, 12:00
Łukasz GlińskiWelcome Thomas, great to see you here. I advanced a bit lately and managed to force the canopy into submission (just in case you wondered - there are 2 pieces in the kit)
18 August, 15:07
Ben MI've had the same issue with vacu canopies. Each one has gotten a little better for me.
18 August, 15:22
Łukasz GlińskiWelcome folks, progress is slow, but I hope to start painting soon (this year at least)
5 September, 18:24
Łukasz GlińskiWelcome JK 👍
After priming I found out a lot of bubbles in the resin, in particular on the fuselage - trying to locate and fill'em all.
20 October, 20:09
CuajeteI'm glad to see this project being resumed, Łukasz.
If you can't get rid of any bubbles, you can say they are bullet holes or pellet holes 😛
21 October, 18:56
Łukasz GlińskiMany thanks for following, finally the painting phase has been started.
White went first, now time for masking, which is a challenge in case of Swiss neutrality markings.
25 December, 22:14
