Nieuport 28 Build
- 1
August 14, 2014
Starting point for the propeller. 3 layer lamination
- 2
August 14, 2014
Propeller after shaping, sanding, 1 coat Golden Oak stain and 3 coats shellac. Still needs final sanding and polishing
- 3
- 4
- 5
August 14, 2014
Gnome Rhone Engine ready to start after cleaning, filing, drilling. Note the spark plugs
- 6
September 16, 2014
Wooden propeller finished
- 7
- 8
September 16, 2014
spark plugs glued to heads. Test fit heads to cylinders
- 9
- 10
September 16, 2014
Test fit propeller on engine
- 11
September 16, 2014
Creating push-rods from scratch to upgrade the ones that came with the kit.
- 12
December 2, 2018
Starting on the upper right wing, rib#1. putting on the rib cap strips
- 13
December 2, 2018
Upper winga rib #2 with cap strip
- 14
December 2, 2018
Stained and shellaced prior to starting assembly
- 15
- 16
- 17
December 2, 2018
cut out the top rib cap strips for both wings and put them on tape so I wouldn't get them mixed up. Started on the frame for the fuselage as well
- 18
- 19
December 3, 2018
Got two more ribs completed today. The two longer ones ore 2 of 9 for the upper right wing
- 20
- 21
December 3, 2018
Leading edge will be on the bottom. I will need to stain and seal the spares and the rib caps before assembling the wing half.
- 22
- 23
December 6, 2018
I like the contrast of the rib caps and the ribs. Will just shellac the rib caps
- 24
December 6, 2018
I will stain the spars the same color as the ribs.
- 25
December 9, 2018
Rib caps complete for upper right wing.
- 26
- 27
- 28
- 29
December 9, 2018
Started laminating the wingtips for both upper wings
- 30
December 10, 2018
Upper wingtips formed! Need to seal with a little CA glue.
- 31
- 32
December 12, 2018
Glued the #1 Rib in, pinned down the spars and glued #2 and #3 rib
- 33
- 34
- 35
December 17, 2018
Had to drill holes in spars for rigging. Ribs glued. Test fit wing tip.
- 36
- 37
December 17, 2018
Wing ribs and spars without wingtip
- 38
December 17, 2018
Different perspective. From the wingtip to the inboard portion of the wing.
- 39
- 40
December 17, 2018
home made CA clue applicator. Made gluing easy and neat. Don't start modeling without it.
- 41
December 23, 2018
Leading and trailing edges added
- 42
December 23, 2018
Shaping begun
- 43
December 23, 2018
Trailing edge
- 44
December 23, 2018
sequence of angle shots
- 45
- 46
- 47
December 23, 2018
Leading edge
- 48
- 49
December 27, 2018
Wingtip on, shaped, false ribs installed.
- 50
- 51
- 52
- 53
- 54
December 31, 2018
A little more progress. Half of the false ribs are on.
Коментари
24 November 2024, 11:33 -
Album info
Work as it progress. Starting with propeller and engine
54 слике
1:16
На чекању
Сви албуми
Прикажи све албуме »