M915 Truck
Trumpeter | Nr. 01015 | 1:35
Fakty
- Marka/Wydawnictwo:
- Trumpeter
- Tytuł:
- M915 Truck
- Numer:
- 01015
- Skala:
- 1:35
- Rodzaj:
- Zestaw
- Wydane:
- 2017 Nowe formy
- kod kreskowy:
- 9580208010151 (EAN)
- Opakowanie:
- Sztywne pudełko (otwierane z góry)
- Temat:
- M915 » Ciężarówki (Pojazdy)
Oznaczenia
M915
US Army (1784-now)
Zawartość pudełka
Ramka plastikowa (Light gray), Blaszki fototrawione (Brass), Guma (Black), Kalkomania wodna (Multi-colored), Instrukcje (papier) (Black & white), Instrukcje (papier) (Multi-colored)
Wymiary:
470x290x95 mm
(18.5x11.4x3.7 inch)
Waga:
1251 g (2.76 lbs)
Boxart zaprojektowany przez Vincenzo Auletta
Co jest w pudełku »Historia produktu
Trumpeter
Instrukcje
Pobierz 3307Kb (.pdf)
Giełda
No partner shops available
Recenzja zawartości
Recenzje zewnętrzne
Przejrzeć HIgh Altitude Scale Modeling
Wszystkie recenzje » (4 razem)
Czasopisma
Komentarzy
AndrewG
The instructions for the container for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
The instructions for the container for this kit from Trumpeter are wrong. It's a minor detail, but if you look at the real thing you will see the error. The step two part 4's are mirrored for each door, in fact they both go the same way for each door, the big lug towards the center for each part 4. This means that parts A12 and A13 are also wrong, you have to cut the plate that the handle connects to off and glue it on the opposite side then rotate the part 180 degrees so that both A10 and A12 are the same on the left door and A11 and A13 are the same on the right door. Other than that it is a great kit that fits together well. The 20' kit and the containers that come with the M915 Truck and the HEMTT M1120 are the same so I'll put this comment on those pages too.
27 May 2021, 04:46
Projekty
Materiał referencyjny
M915 early variants AM General-built Trucks of the M915 Family in the US Army / ...
American Special Nr. 3033
Carl Schulze
2018 Wszystkie walkaroundy » (3 razem)